31
Chains, bracelets, loose clothing or foreign objects in the vicinity of moving parts can represent a danger for
the operator.
Do not place your hands on the wheel: when moving the arm to its working position your hand
could be crushed between the rim and the mounting head.
DEMOUNTING STANDARD TYRES
- Place the horizontal am into the working position.
- Turn the spindle until the valve is in the “3 o’clock” position (roughly 10 cm after the tool).
-
Lower the mounting bar (M) until the mounting tool rests against the edge of the rim and lock it using the lever.
This way the arm is locked in a vertical direction.
- Once the arm has been locked in a vertical direction, the mounting head must be moved away manually from the
rim (about 2 mm) using the handwheel located on the left section of the horizontal arm.
ADDITIONAL LOCKING SYSTEM FOR THE HORIZONTAL ARM
- This machine is equipped with an additional locking system for the swing arm, which allows to avoid outward
movement of the mounting head during working operations.
To prevent industrial accidents, keep hands and other parts of the body as far as possible from the
tool arm when the spindle is turning.
FREE POSITION
THE HORIZONTAL SWINGARM CAN MOVE
BACKWARD AND UPWARD INSIDE THE SLOT
ON THE ADDITIONAL PLATE.
LOCKED POSITION
TURNING THE PLATE AGAINNST THE PIN,
THE HORIZONTAL SWING ARM CANNOT
MOVE BACKWARD ANYMORE.
