32
Fig. 11a
DEMOUNTING UPPER BEAD
Start to insert the tool in the tyre and possibly exploit the bead breaking disc, positioning it in the top part, without
forcing the side of the tyre excessively.
NB. If you have difficulty in positioning the tyre on the end of the tool, you need to turn the spindle until it positions
itself correctly.
While turning, make sure the tool does not touch the pressure sensor, if installed.
- Make sure the bead of the tyre is over the extractable tool.
Raise the extractable tool (fig. 11a); if the extractable tool is unable to complete its full stroke, you need to press
the tyre in the position opposite the tool to facilitate the movement (fig. 11a).
- Press the rotation pedal to turn the tyre clockwise by 360° until the upper bead
is completely demounted (fig. 12)
Fig. 12
DEMOUNTING LOWER BEAD
- Turn the spindle until the valve is in the “3 o’clock” position.
- Take the tool out again, position the second bead of the tyre over the tool and raise
the tool, using lever H. (fig. 13)
- Turn the tyre clockwise until the tyre comes right off the rim.
Fig. 13
