14
Install the spring using a plastic tie to pull it.
Tight the fulcrum fixing bolt.
2 wrench 24 mm are required
NOTE: Make sure the arm can move freely,
do not overtight the fixing bolt, the arm has
to be free to move and without excessive
play.
Horizontal arm Installation
Install the horizontal arm on the vertical
post support, make sure to place the provi-
de shims with the machine, at least 1 piece
per side.
Note: in order to assemble the horizontal
arm, it is needed to remove first the additio
-
nal locking plate assembled on the C-sha-
ped support on the vertical arm.
Allen wrench 10 mm is required.
Insert the pin, using a hammer.
NOTE: This operation can be difficult, ope
-
rate carefully, making sure of the correct
aligment of each component.
