Assembly Instructions Packet
Classic
®
HD
Motorcycle Tire Changer
For our latest instructional videos, visit:
NoMarTireChanger.com
(or scan the QR code below)
Tools Required for Assembly
:
•
5/32" Hex (Allen) Wrench - Included in Lube Box inside of Box
A
•
3/16" Hex (Allen) Wrench - Included inside of Box
B
•
3/4" (or 19mm) Wrench - Socket w/Ratchet, Combination or similar
•
7/16" (or 11mm) Wrench - Socket w/Ratchet, Combination or similar
For mounting your Tire Changer to the floor, we recommend using 1/2" x 3+1/2" (or 12mm x 100mm)
Concrete Wedge anchors (Power-Stud+
®
SD1 or similar) drilled to a minimum depth of 2+3/4" (or 70mm)
and installed per manufacturer directions with nuts and washers.
