ATEN VanCryst VP3520, Руководство пользователя

Страница: 29 / 89

17
Chapter 3
Local Operation
Overview
This chapter provides information on operating the VP3520 using the front
panel and IR remote control.
Note: The instructions use pushbutton to refer to the front panel and button to
refer to the IR remote control.
Operation Considerations

To use the IR remote control, make sure to insert the IR receiver (supplied
in the package) to the VP3520.
 To ensure smooth operation using the IR remote control, use the IR remote
control within the effective range (6 m) and keep a clear line-of-sight
between the remote control and the IR receiver connected to the VP3520.
Switching Sources
To switch the video source on a display:
1. Press a display selection pushbutton (VP3520 front panel) / button (IR
remote control) to select a display. The pushbutton (VP3520 front panel)
for the selected display lights orange.
2. Press a source selection pushbutton (VP3520 front panel) / button (IR
remote control) to assign the source. The pushbutton (VP3520 front panel)
for the selected source lights orange.
Note: appears on the top left corner of the OSD for 5
seconds when the source is switched. This is the resolution from the
original source without scaling.