ATEN VanCryst VP3520, Руководство пользователя

Страница: 51 / 89

VP3520 User Manual
39

Auto Display: Sets the display auto power on and off function for the
connected HDMI and HDBaseT displays.
 Display auto power on: Enables or disables the display auto power on
function. The connected display will automatically power on when the
VP3520 detects an input source.

Enable screen down (Relay 1): Check to enable the auto screen down
function. The connected projector’s screen will automatically power on
and scroll down when the VP3520 detects an input source.
 Advanced: Click to select one or more input source for auto power on
detection.

Display auto power off: Enables or disables the display auto power
off function. The connected display will automatically power off when
the connected input source on the VP3520 is removed and undetected
for a specified active time.
 Active time (mins): Sets the active time in minutes for the VP3520 to
power off the connected display when an input source is removed and
undetected for a specified active time.

Enable screen up (Relay 2): Check to enable the auto screen up
function. The connected projector’s display will automatically power
off and scroll up when the connected input source on the VP3520 is
removed and undetected for a specified active time.
 Display A control settings: Sets the control method for the Display A.
 Use the drop-down menu to select a control method for the Display A.
Options are Display A / RS-232 Serial / RS-232 HDBT Out / PJ-Link 1
/ PJ-Link 2.

Use the control commands to test the display on and off function.
 If the Display A control method is selected, the control type
(CEC) and Channel (HDBT Out) will be fixed. Click
Display ON
and Display OFF to test the commands.
Note: It is not guaranteed that CEC protocol will work on all connected
display devices. If the Display ON and/or Display OFF
commands do not work on your display, other control methods
such as RS-232 serial, RS-232 HDBT out, and PJ-Link can be
considered.
 If the RS-232 Serial or RS-232 HDBT Out control method is
selected, select a command type between HEX and ASCII before
testing the control commands.