ATEN VanCryst VP3520, Руководство пользователя

Страница: 52 / 89

Chapter 4. Remote Operation
40

If the PJ-Link 1 or PJ-Link 2 control method is selected, set the IP
address, port, and password before testing the control commands.
To set the IP address, port, and password for the PJ-Link 1 and 2,
click and the screen below
appears. Click Save when you have entered the correct IP address,
port number, and password. Use the drop-down menu to select a
command, and click
Test to test the selected command.
 Display B control settings: Sets the control method for the Display B.
 Use the drop-down menu to select a control method for the Display B.
Options are Display A / RS-232 Serial / RS-232 HDBT Out / PJ-Link 1
/ PJ-Link 2.
 Use the control commands to test the display on and off function.
 If the Display B control method is selected, the control type
(CEC) and Channel (HDMI Out) will be fixed. Click
Display ON
and Display OFF to test the commands.
Note: It is not guaranteed that CEC protocol will work on all connected
display devices. If the Display ON and/or Display OFF
commands do not work on your display, other control methods
such as RS-232 serial, RS-232 HDBT out, and PJ-Link can be
considered.
 If the RS-232 Serial or RS-232 HDBT Out control method is
selected, select a command type between HEX and ASCII before
testing the control commands.
 If the PJ-Link 1 or PJ-Link 2 control method is selected, set the IP
address, port, and password before testing the control commands.
To set the IP address, port, and password for the PJ-Link 1 and 2,