ATEN VanCryst VP3520, Руководство пользователя

Страница: 23 / 89

VP3520 User Manual
11

To connect an HDMI source device, connect the source device to the
VP3520 using an HDMI cable. You can connect up to 3 HDMI source
devices.
3. Connect up to 2 displays to the unit.
 To set up a display at a distance, connect a suitable Rx device (e.g.,
VE802R) to the VP3520 using an Ethernet cable, to which the display
(e.g., projector) is connected. To remotely control the connected
projector’s screen up and down, connect the screen to the relay ports.
For wiring information, see
Relay Connection , page 12.

Connect the unit to an HDMI display using an HDMI cable. To
remotely control the connected display, connect the RS-232 and IR
ports to the display. For wiring information, see
RS-232 Serial
Connection , page 15 and IR Serial Connection , page 16.
4. (Optional) To supply independent audio, connect an audio source device
(e.g., media player) or a microphone to the VP3520.
5. (Optional) Connect the VP3520 to a speaker via an appropriate output
port.
6. (Optional) To configure the unit’s settings via RS-232 commands, connect
a hardware controller (e.g., ATEN Control Box) to the VP3520.
7. (Optional) To allow access to the web interface, connect a network switch
to the VP3520 using an Ethernet cable.
8. (Optional) To control the VP3520 using an IR remote control, connect the
IR receiver to the VP3520.
9. Plug the power cord to the power socket.
10. Put the power switch to ON .
11. Press the power pushbutton to power on the VP3520.
12. Power on all the connected devices.