ATEN VanCryst VP3520, Руководство пользователя

Страница: 44 / 89

Chapter 4. Remote Operation
32

Display A / Display B: Shows a preview of the currently selected source
and indicates the source number at the center of the preview. Click to
rename the source.
 Mirror mode: Select this option for display B to show identical video
content as display A.

Source: Lists the connection status of all source ports and the currently
assigned source (indicated in green).
 To switch the source for the display, click on one of the listed sources.
The assigned source is highlighted green.
 To rename the source, click .
 Ratio:
 Scale to whole: Fully extends the video to the four sides of the display.
 Auto fit: Proportionally scales the video to fit the display without
cutting any content off. This may leave some blank on either the top
and bottom or the left and right of the screen.
 Auto cut: Proportionally scales the video to fully fill the display. The
content that goes out of the display range will be cut off.
 Resolution: Click the drop-down list to select a resolution and refresh rate
setting for the display device. This field is only available when the display
is connected to the VP3520. Make sure to select the correct display
resolution for the connected display, otherwise the display will not display
any content.