ATEN VanCryst VM3200, Руководство пользователя

Страница: 65 / 209

Chapter 3. Front Panel Operation
49
Output Port Selection
Use the Output Port pushbuttons to select the Output port you want to
configure.
To select which output display corresponds to each input source, do the
following:
1. Press any Output port pushbutton (1-32). The selected Output port LED
lights steady.
In the example below, Output port
1 pushbutton has been pressed.
Available Input ports light up. Because no Input LEDs are on, no ports
have already been assigned to Output port
1 .
2. If an Output port pushbutton is pressed a second time, it is deselected and
the LED turns off.
3. To connect the selected Output port(s) to an Input port, press the Input port
pushbutton to which you want the Output port(s) tied. The newly selected
Input port LED light up, and the LCD information is updated.
In the example below, pressing Input port
2 ties it to Output ports 2 , 3 and
4 .
INPUT
OUTPUT
1 2 5 5* 1 1 3 4
1 2 3 4 5 6 7 8
INPUT
OUTPUT 1 2 5 5 1 1 3 4
V + A
9 10 11 12 13 14 15 16
P1
↓
:Next