ATEN VanCryst VM3200, Руководство пользователя

Страница: 144 / 209

VM3200 / VM3250 User Manual
128
Š
In-Board : Use this set of settings to configure the IR/RS-232 signals for
each input port.
Š Port 1 ~ Port 32 : Configure each input port to use the Local IR/RS-
232 , Tx IR/RS-232 , or Loopback for IR/RS-232 signals.
Š
Board:
Š Broadcast (1-All) : Controls all the connected devices
simultaneously.
Š
Manual : Controls specified devices simultaneously. Click Edit to
select devices.
Š Use Loopback for the IR/RS-232 signals to be sent back to local source or
local display device connected to the same port on the same I/O board.
This allows you to use the IR/RS-232 connection to control devices
locally. Loopback prevents the IR/RS-232 signals from being sent across
the connection to another I/O board. The Loopback setting is useful when
you use a VM8514/VM8584 board to extend displays but use a different
board type (not VM7514/VM7584) for input devices and want to use the
IR/RS-232 signals for local control.
Š
RS-232 Command Line: Use this setting to remotely control a connected
device via RS-232 commands.
Š
Connection : Sets the connection path for the IR/RS-232 signals.
Š Use the drop-down menu to select Follow Video Path to have the
IR/RS-232 signal use the same connection path as the profile settings.
Š
Use the drop-down menu to select Broadcast (1-All) to broadcast the
IR/RS-232 signal from one port to all ports. Use the drop-down menu
that appears to select the port that broadcasts the IR/RS-232 signal.
Š Out-Board : Use this set of settings to configure the IR/RS-232 signals for
each output port.
Š Port 1 ~ Port 32: Configure each output port to use the Local IR/ RS-
232 , Rx IR/ RS-232 , or Loopback setting for the IR/RS-232 signals.
Note: By default the RS-232 Return Path uses the lowest port number
available for a connection. This setting can not be changed.