ATEN VanCryst VM3200, Руководство пользователя

Страница: 48 / 209

VM3200 / VM3250 User Manual
32
VE805R / VE816R Front View
VE805R / VE816R Rear View
No. Component Description
1 LEDs Three LEDs – Power, Link and HDMI Out – light when
the unit is properly connected to an appropriate source.
Š
Power - lights Green to indicate the unit is receiving
power.
Š
Link - lights Orange to indicate that communication
between VE805R / VE816R and output board is
established.
Š
HDMI Out - lights Orange to indicate the HDMI output
signal is good. LED blinks Orange every second to
indicate that the device is in F/W upgrade mode.
2 IRPort Connect the IR transmitter or receiver cable port into this
mini stereo jack port.
3 RS-232 Port Use the captive screw connectors (3 pole) to connect the
cable from your serial device into the RS-232 port.
4 HDMI Output Port Connect the cable from your HDMI display device
(monitors, projectors, TVs) into this port.
5 Firmware Upgrade
Switch Set this switch to OFF (left) for normal operation. Set this
switch to ON (right) and reset the unit’s power to enter
firmware upgrade mode.
6 HDBaseT Input Use a Cat 5e cable to connect the VE805R / VE816R to
the VM8514 output board.
7 Power Jack The power adapter cable plugs connects here.
5 4 2 3
1
7 6