ATEN VanCryst VM3200, Руководство пользователя

Страница: 19 / 209

Chapter 1. Introduction
3
The VM7404 is a 4-Port 3G-SDI input board provides the capability to connect
to SDI sources, such as 3G-SDI, HD-SDI and SD-SDI, and supports high
quality video resolutions up to 1080p @ 60Hz. The VM7404 also supports
separate analog stereo audio signals for independent routing.
The VE805R HDMI HDBaseT Lite Receiver with Scaler / VE816R 4K HDMI
HDBaseT Receiver with Scaler can be combined with an ATEN HDMI
HDBaseT transmitter or splitter to extend your HDMI display up to 100 m
from the source using a single Cat 6a cable or ATEN 2L-2910 Cat 6 cable.
With a built-in scaler, the VE805R / VE816R supports the scaling of different
video resolutions. When combined with ATEN HDBaseT output boards, it
supports video wall functionality. In addition, the VE805R / VE816R is
equipped with RS-232 and IR signaling pass-through which allows RS-232
and IR channel control from the remote to local unit, to control the HDMI
source, or from the local to remote unit, to control the display device. The
VE805R / VE816R is HDCP compliant.
Combining these devices, this solution can be conveniently customized,
allowing users to independently switch and route video and/or audio signals to
various monitors, displays, projectors, and/or speakers simply by pressing
front panel pushbuttons. The VM3200 / VM3250’s built-in Scaler encodes
video formats in order to provide seamless, real-time switching while ensuring
stable signal transmission. In addition, the front panel LCD shows a quick view
of active port connections, and includes an option to select an EDID Mode that
yields the best resolution across different monitors.
The VM3200 / VM3250 is easily expandable and accommodates ATEN’s hot-
swappable I/O boards. Equipped with automatic signal conversion, it allows a
combination of digital video formats, thus making it ideal for large-scale AV
applications.
Setup is fast and easy; install the modular I/O boards by sliding them into the
VM3200 / VM3250’s rear panel slots, then plug the device cables into the
appropriate ports on the I/O boards and your ready.
This solution can be connected to the network through the VM3200 /
VM3250’s LAN port, allowing the installation to take advantage of internal
Cat 5 Ethernet wiring built into most modern commercial buildings. Once
initial network setup has been accomplished at the local level, the VM3200 /
VM3250 can be conveniently managed remotely using any web browser and a
free app, the ATEN Video Matrix Control App.