ATEN VanCryst VM3200, Руководство пользователя

Страница: 64 / 209

VM3200 / VM3250 User Manual
48
3. To switch to another Input port, press any Input port pushbutton. The
Output port LED(s) tied to the said Input port light up.
In the example below, pressing Input port
2 shows it is tied to Output ports
3 and 4 .
4. To connect Output port 2 to Input port 2 in the example above, press the
Output port 2 pushbutton. The Output port 2 LED will also light up. This
indicates that Input port 2 is now connected to Output ports 2 , 3 and 4 .
Once the signal from the selected Input port is successfully tied to the
Output port, the LEDs turn off and the LCD information is updated.
Note: 1. Pressing an Input port a second time deselects it.
2. Input ports that are not configured or tied to any output port do not
appear in the LCD screen.
3. Pressing the Cancel pushbutton once stops the Input Port Selection
operation and the LCD displays the active setting. Pressing the
Cancel pushbutton again turns all LEDs off.
4. After 10 seconds of inactivity, all the LEDs turn off.