Atek HP 8753D, Руководство пользователя, Страница: 590 / 677

NO MARKER DELTA -SPAN NOT SET
Error Number
15
Y ou must turn the delta marker mode on, with at least two markers displayed,
in order to use the
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
MARKER -> SPAN softkey function.
NO MEMORY AVAILABLE FOR INTERPOLATION
Error Number
123
Y ou cannot perform interpolated error correction due to insucient memory .
NO MEMORY AVAILABLE FOR SEQUENCING
Error Number
126
Y ou cannot modify the sequence due to insucient memory .
NO PHASE LOCK: CHECK R INPUT LEVEL
Error Number
7
The rst IF signal was detected at pretune , but phase lock could not be
acquired. Check the signal level to the R channel input to make sure it is 035
dBm or higher . Refer to the HP 8753D Network Analyzer Service Guide for
troubleshooting.
NO SPACE FOR NEW CAL. CLEAR REGISTERS
Error Number
70
Y ou cannot store a calibration set due to insucient memory . Y ou can free
more memory by clearing a saved instrument state from an internal register
(which may also delete an associated calibration set, if all the instrument states
using the calibration kit have been deleted). Y ou can store the saved
instrument state and calibration set to a disk before clearing them. After
deleting the instrument states , press 4
PRESET
5 to run the memory packer .
NOT ALLOWED DURING POWER METER CAL
Error Number
198
When the analyzer is performing a power meter calibration, the HP-IB bus is
unavailable for other functions such as printing or plotting.
NOT ENOUGH SPACE ON DISK FOR STORE
Error Number
44
The store operation will overow the available disk space . Insert a new disk or
purge les to create free disk space .
Error Messages 10-15