Atek HP 8753D, Руководство пользователя, Страница: 580 / 677

CANNOT MODIFY FACTORY PRESET
Error Number
199
Y ou have attempted to rename , delete , or otherwise alter the factory preset
state . The factory preset state is permanently stored in CMOS memory and
cannot be altered. If your intent was to create a user preset state , you must
create a new instrument state , save it, and then rename it to \UPRESET".
Refer to Chapter 12, \Preset State and Memory Allocation," for more detailed
instructions .
CANNOT READ/WRITE HFS FILE SYSTEM
Error Number
203
The disk is being accessed by the analyzer and is found to contain an HFS
(hierarchical le system) or les nested within subdirectories . The analyzer
does not support HFS. Replace the disk medium with a LIF or DOS formatted
disk that does not contain les nested within subdirectories .
CAN'T STORE/LOAD SEQUENCE, INSUFFICIENT MEMORY
Error Number
127
Y our sequence transfer to or from a disk could not be completed due to
insucient memory .
CH1 (CH2) TARGET VALUE NOT FOUND
Error Number
159
Y our target value for the marker search function does not exist on the current
data trace .
CONTINUOUS SWITCHING NOT ALLOWED
Error Number
10
Y our current measurement requires dierent power ranges on channel 1 and
channel 2. T o protect the attenuator from undue mechanical wear , test set hold
will be activated.
The \tsH" (test set hold) indicator in the left margin of the display indicates
that the inactive channel has been put in the sweep hold mode .
COPY: device not responding; copy aborted
Error Number
170
The printer or plotter is not accepting data. V erify the cable connections , HP-IB
addresses , and otherwise ensure that the copy device is ready .
Error Messages 10-5