Asyst Technologies VersaPort 2200, Техническое руководство

Страница: 163 / 288

Released Rev. C 2000-1252-01 Page 145
VersaPort 2200 Technical Manual
Appendix B: Communications Software
SECS Communication
a
If MSC_INTLK (ECID 13) = 1 (enabled);
23 = RCS_ENABLE_OPEN
24 = RCS_DISABLE_OPEN
S2,F22: Remote Command Acknowledge (RCA) *S,H
←
E
Description:
Acknowledge or error.
Structure:
<HCACK>
S2,F25: Loopback Diag. Request (LDR) *S,H
→
E, reply
Description:
A diagnostic message for checkout of protocol and communication circuits. The binary
string is echoed back.
Structure:
<ABS>.
Exceptions:
None.
S2,F26: Loopback Diag. Data (LDD) *S,H
←
E
Description: The echoed binary string.
Structure:
<ABS>.
Exceptions:
None.
S2,F33: Define Report (DR) *S,H
→
E, reply
Description:
This code defines a set of event reports (S6,F13) to be sent by the VersaPort to the Host.
First, the Host defines reports (VID list of data items) using this message. These reports
are linked to events by the LER message (S2, F35). When the event actually occurs, the
annotated report is sent (S6,F13), including all items defined in this report.
Structure:
L, 2
1. <Dataid>
2. L, a
1. L, 2
1) <RPT1>
2) L, b
1) <VID1>
. . .
b) <VIDb>
. . .
a. L, 2
1) <RPTa>
2) L, c
1) <VID1>
. . .
c) <VIDc>.
Exception:
A list with zero length, following <DATAID>, deletes all report definitions and associated
links. See S2,F35 (Link Event Report).