Asymtek DV-7000 Series Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 60

background image

Operation

31

DV-7000 Optional Configuration

The optional configuration allows the DV-7000 to be used for dispensing lines and/or patterns. The optional
configuration includes the following:

•

Luer-compatible Dispensing Cartridge

•

Stiffer Spring to stabilize the Floating Head

•

Rigid Feed Tube Assembly

The special dispensing cartridge fits into the bottom of the pump in the exact same way as the standard
dispensing cartridge. Operation and maintenance of the special dispensing cartridge is the same as for the
standard dispensing cartridge.

"

NOTE

This optional configuration may be available as a standard feature on the DV-7222-CL1, DV-
7321-CL8, DV-7322-CL8, and DV-7331-CL8 models. Contact Asymtek for more information.

Tools and Materials Needed

•

No-float Spring Kit (P/N 198537)

•

Rigid Feed Tube Assembly (in Consumables Kit)

•

Phillips-head

Screwdriver

•

Dispensing Cartridge ( in Shipping Kit)

To convert the DV-7000 to optional configuration (see Figure 4-8):

WARNING!

CAUTION!

This procedure MUST NOT be performed while the pump is mounted on the
dispensing head.

Only trained service technicians should perform this procedure.

1. Perform a service shutdown as specified in the applicable dispensing system manual and

remove the pump as specified in “

Removing the Pump from the Dispensing System

” in the

Maintenance

section.

2. If installed, remove the syringe bracket from the front of the pump.

3. Install the Luer adapter dispensing cartridge into the valve body as specified in “

Loading a

Dispensing Cartridge

” earlier in this section.

4. Use the Phillips-head screwdriver to remove

the two screws on the spring cover plate.
Remove the currently installed spring from
the back of the pump.

5. Insert the bottom of the No-float Spring (P/N

47-1312) into the back of the pump,
compress the spring, and then slide the top
of the spring into the slot.

6. Reinstall the spring cover plate and the two

screws.

7. Install the pump onto the dispensing system.

Refer to the

Installation

section, if necessary.

Figure 4-8 DV-7000 Optional Configuration

«
...
33
34
35
36
37
...
»

Содержание DV-7000 Series





























































Отзывы:

Нет отзывов

Похожие инструкции для DV-7000 Series

Бренд: Amana Страницы: 26

Бренд: Gorenje Страницы: 72

Бренд: T.I.P. Страницы: 136

Бренд: Becker Страницы: 4

Tranquility TR Series

Бренд: ClimateMaster Страницы: 96

Бренд: Elite Страницы: 9

Бренд: Dimplex Страницы: 64

Бренд: CASELLA CEL Страницы: 27

Бренд: Unico Страницы: 48

Бренд: EBARA Страницы: 18

Бренд: Eckerle Страницы: 6

Бренд: Waldbeck Страницы: 9

Thermo Pro 90 HDD

Бренд: Webasto Страницы: 6

VARION C-POWER 20.0

Бренд: elco Страницы: 44

Бренд: Tecnosystemi Страницы: 12

Бренд: Quaker Blast Страницы: 28

Бренд: Graco Страницы: 20

Бренд: Johnson Controls Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды