ASV SC50 Scout, Руководство по обслуживанию и ремонту

Страница: 83 / 111

3. Remove the cap from the outboard bearing
assembly as shown. The cap will be destroyed
upon removal and must be replaced. (fig. 12-11)
Note: Use a large blade type screwdriver as shown.
Drive it in at the outer edge of the cap, then pry the
cap out. This is the quickest and most effective method
and will prevent damage to the outboard bearing.
4. Remove the snap ring that holds the bearing
assembly into the sprocket shaft. (fig. 12-12)
5. Use a puller to break the bearing assembly loose
from the sprocket shaft. (fig. 12-13)
6. Once loose, remove the bearing assembly from
the sprocket shaft as shown. (fig. 12-14)
7. Remove the bolts securing the sprocket to the
drive motor. (fig. 12-15)
8. Remove the sprocket from the undercarriage.
(fig. 12-16)
Note: The sprocket is quite heavy, it may be a good
idea to use a hoist and suitable lifting straps to remove
it from the machine.
Installation
1. To install the drive sprocket, reverse the removal
procedure. Torque the sprocket mounting bolts
upon installation to 129 +/- 10 Lb. Ft.
12-4
Rubber Track Utility Vehicle
12. Undercarriage
12-12
12-11
12-13
12-14
12-15
12-16
https://tractormanualz.com/