ASV SC50 Scout, Руководство по обслуживанию и ремонту

Страница: 28 / 111

Engine Oil Specifications
ASV recommends using Posi-Lube 10W-30 Heavy
Duty Engine Oil for most conditions. In the event of an
alternate working environment, the chart above may be
used as a guide to oil viscosity grades.
You may also use a quality engine oil substitute meet-
ing the following minimum specification:
• API CH-4 multigrade engine oil.
Oil Level Check
To check the oil level:
1. Park the machine on level ground.
2. Remove the engine cover to gain access to the
engine compartment.
3. Locate and remove the engine oil dipstick (B) from
its tube.
4. Wipe the dipstick with a clean shop cloth and re-
insert it into the tube until it comes to rest in its
seated position.
5. Remove the dipstick once again and inspect the
end for oil on the level indicator.
6. Oil should be present on the dipstick up to, but
not over the upper (full) level indicator notch. If
the level is correct, reinstall the dipstick and
then reinstall the engine cover to complete the
procedure.
7. If the level is low, add the proper grade and viscos-
ity engine oil and re-check as necessary until the
proper level has been achieved. Then re-install the
dipstick and filler cap and install the engine cover
to complete the procedure.
4-7
Rubber Track Utility Vehicle
4. Maintenance
4-18
4-19
B
Full
Low
https://tractormanualz.com/