T3-OPX User Guide
67
8
Automatically calibrating the
job/media height
The T3-OPX can automatically adjust the height controllers to the media that the operator
wants to print on. The height can then be saved to a media profile.
Using the fully automated height adjustment process
1.
Select the media to print on.
2.
Test that the media is detected by the edge sensor.
a.
Go to
Handling
and possibly adjust the
Print unit height
to ensure that the print
engine is placed high enough for the media to enter the print zone under the print
unit.
b.
Move the media under the edge sensor manually or by placing it on the feeding
side of the belt(s) and then starting the belts.
c.
Validate that the edge sensor registers the media and it is higher than the preset
threshold.
3.
Place the media on the feeding side of the belt again.
4.
Go to the
Basic
tab in
Media Settings
.
5.
Adjust the Force to the material.
6.
Start automatic height adjustment of the media by pressing the
move and adjust
button:
a.
The adjustment process is indicated by dots circulating instead of the buttons.
b.
The media is moved under the print engine.
c.
The height is adjusted.
d.
The media is moved back to the feeding zone.
e.
The
Print Height (mm)
is updated with the new value and adjustments buttons are
visible again.
Содержание TrojanLabel T3-OPX
Страница 1: ...U S E R G U I D E...
