AstroNova TrojanLabel T3-OPX Скачать руководство пользователя страница 26

Страница: 26 / 98

T3-OPX installation

T3-OPX User Guide

Powering on

Safety check

Before powering on the T3-OPX, visibly ensure that no foreign objects are interfering with the
print engine module.

Warning:

Always use the supplied power supply cord connected to a grounded power outlet.

Power on process

Turn on the power via the power inlet switch on both T3-OPX and mail table (MT1/MT2).

Calibrate the table position and level the unit

Calibrate the table position for the unit to determine the zero height position of the table and
also ensure the unit is aligned to the table (x/y tilt).

Open the service menu.

Select

Initial Full Calibration

and press

Run

Wait for the process to finish. This process requires several minutes.

Installing ink cartridges

Warning:

For safety, keep ink cartridges out of the reach of children. If ink is accidentally

ingested, contact a physician immediately.

Note:

If the ink door is opened during printing, the printing will stop. This will not harm the

machine.

Open the ink door on the back of the unit.

Remove the orange plastic protectors.

Содержание TrojanLabel T3-OPX



































































































Результаты поиска

Содержание TrojanLabel T3-OPX

Отзывы:

Похожие инструкции для TrojanLabel T3-OPX

Бренды по названию

Популярные бренды

AstroNova TrojanLabel T3-OPX, Руководство пользователя

Результаты поиска

Содержание TrojanLabel T3-OPX

Отзывы:

Похожие инструкции для TrojanLabel T3-OPX

Бренды по названию

Популярные бренды