Operation menus
T3-OPX User Guide
64
Select a profile
Select a media profile from the drop-down list.
Delete the selected profile
Deletes the media profile, when confirming the deletion pop up.
Basic tab
This is where the typical settings are managed.
TOF offset (mm):
Set the distance from the edge of the material (registered by the edge sensor) to the posi-
tion of the printed artwork.
Unit Cost:
Cost of the media (one unit, for example a box, paper bag etc.). Currency is set in the
HOME > Consumables
menu.
Print height (mm):
Distance between the table and the printhead crash plate. Set the value in millimeters.
The print unit is not physically moved until the apply settings button is pressed
Auto height adjustment:
Caution:
The unit will move down automatically. Please remove any unwanted items
from the belt.
Important:
Center the print unit in the middle of the table for optimal Calibration results.
The auto adjustment will use the “weight” specified in the Force setting below to apply
pressure and use the force feedback to set the height. Once the height is determined, the
Print height field updated. There are two options for auto height adjustment:
•
Adjust height button
Start automatic height adjustment of the media placed under the pressure plate.
Содержание TrojanLabel T3-OPX
Страница 1: ...U S E R G U I D E...
