Astro Machine AstroJet M2, Руководство оператора

Страница: 37 / 90

SECTION 3
OPERATING PRINTER
31
SECTION 3 – Operating Printer
Once Printer Driver is installed and Printhead is primed, you are ready to start printing.
Set up your job and send it to Printer. Printer will start and print.
This rest of this section is divided into two parts:
1. How to set up a job to print from Microsoft Word.
2. Driver properties and the various options available when you run a job.
Printer Driver installed in Section 2 should be set as default driver. It is then accessible through your
applications ( such as Microsoft Word ). Other types of applications and database management software will
work in a similar manner when using this Driver. This Section further assumes that feed is set up and
Printer is connected to your computer.
Setting Up a Job in MS Word
When setting up a job to print in MS Word or any other
application, first determine the print area of the Printer and
the media sizes it can handle.
Maximum print area for Printer:
8.5" wide x 14.5" long.
Maximum paper size Printer can feed:
9" wide x 14.5" long. ( See diagram at right. )
Minimum paper size Printer can feed:
3" wide x 4.2" long.
To set up maximum print area for a 9" x 14.5" document,
set paper size to 9" wide x 14.5" long in
Custom Paper
setting. Set top and bottom margins to 0" or any margin
needed. Set right-hand and left hand margins to 0.25".
You can now lay out job and print maximum printing area.
For other page sizes such as 8.5" x 11" ( standard letter ) or
8.5" x 14" ( legal size ) set paper size to exact size and set
margins as needed.
NOTE: Set Left-hand Side Guide to proper 9" position
when running 9" wide media.
Set Guide to 8.5" position when running 8.5"
or narrower media.