Astro Machine AstroJet M2, Руководство оператора, Страница: 70 / 90

SECTION 4
MAINTENANCE
64
[A] Grit Rollers: Clean as needed by
moistening a small hard-bristled brush
or toothbrush with distilled water.
DO NOT use anything other than
distilled water to clean Rollers.
[B] Media Sensors: Paper lint and
dust may build up on Media Sensors.
Use a can of compressed air or a damp
(
not wet ) foam or lint-free cotton swab
to gently swab Sensors. Take care not
to drip water into Circuit Boards. Use
a clean, dry swab to dab surfaces dry.
Remember to wipe clear panel over
Sensor Receiver in upper Printhead Assembly (
see inset ).
[C] Capping Station Seal and Squeegee. Clean as needed with
distilled water on a damp, lint-free cloth. Be careful not to splash or
drip ink on other parts of Printer.
[D] Printing Platen. Wipe with distilled water on a damp,
lint-free cloth. Pat dry with a lint-free cloth.
Cleaning Ink Revolver Couplings
1. First Deprime system and remove
Printhead Cartridge.
2. Moisten a foam swab in distilled water.
3. Insert swab into one of the ink channels and
rotate to clean.
4. Use a new swab for each remaining ink
channel until all 10 openings are clean.
(
5 on each side. )