Astro Machine AstroJet M2, Руководство оператора, Страница: 41 / 90

SECTION 3
OPERATING PRINTER
35
Using Layout Tab Printing Adjustments
Image Image Position – Left Adjustment moves image area (- 3mm left to +200mm right ) from
left edge of media. Top Adjustment moves image up or down (- 5mm up to +200mm down ) from
top left corner of media used. ( 0.1mm increments )
Max Page Width – Sets width of actual print area. ( 0.1mm increments ) This shuts off nozzles in
non-printing area ( not used for printing ) and saves ink. NOTE: Can be no larger than
maximum print width for Printer (8.5"/215.9mm).
Purge Bar Position*
– In operation, Printhead spits a small amount of ink in gap between pieces
to keep nozzles refreshed. For irregular-shaped pieces, Sensor may misread the irregular edge as
the actual edge of media and spray on the piece prematurely instead of in actual gap between
pieces. This feature allows you to manually set gap (
in 0.1mm increments ) to account for extra
length needed to reach actual gap.
* See also
“Purge Bar Position”
in Printer Toolbox section.

Watermark – Prints a light background watermark in paper while printing original document.
When this option is selected,
“First page only”
option prints watermark on first page, but not
subsequent pages, unchecking box prints watermark on all pages.
Custom button lets you create a new watermark or edit an existing watermark, including font
selection, color, size and printing angle.