Astro Machine AstroJet M2, Руководство оператора, Страница: 35 / 90

SECTION 2
INSTALLING PRINTER
29
4. Adjust Feed for Media Thickness. Media Thickness Adjustment Knob [H] sets uppermost
stopping point of the Feed Table to accommodate single sheets or heavier card stock/cardboard.
(
Media thickness range – 0.004"/0.1 mm to 0.020"/0.5 mm thick )
NOTE: Indicator
provides a quick visual
check of setting:
Up = thicker setting,
Flush with surface =
single sheet setting.
Single Sheet: Turn
Thickness Adjustment
Knob counterclock-
wise until it stops.
Cardstock/Cardboard: Turn Thickness Adjustment Knob clockwise until it stops
.
6. Press
“Up”
Button until Top Sensor stops
platform automatically.
7. Adjust Media Guide Assembly. Loosen side knob to
adjust Guide [I] to fit media length.
8. Adjust Rear Side Media Guide [J] to fit media width.
Retighten knobs.
NOTE: Feeder may not feed larger and heavier media when stack is full. Amount of
media that can be stacked on Printer is determined by weight of material. If this is the
case, reduce amount of media in stack until Feeder functions properly.