Astria Fireplaces Arcadia18MN, Инструкция по установке и эксплуатации

Страница: 5 / 28

www.Astria.US.com
126896-01A 5
PRODUCT
IDENTIFICATION
Figure 1 - Product Identification
UNPACKING
CAUTION: Do not remove the
data plates from the grate as-
sembly. The data plates contain
important warranty and safety
information.
1. Remove log set assembly from carton.
Note: Do not pick up assembly by logs. This
could damage the log set. Always handle as -
sembly by grate.
2. Remove control cover floor media components.
3. Remove all protective packaging applied to
log set for shipment.
3. Check all items for any shipping damage. If
damaged, promptly inform dealer where you
bought the appliance.
PRODUCT FEATURES
OPERATION
This unitized gas log set is tested and approved to
ANSI Z21.60a and CSA 2.26a-2000 as a vented
decorative appliance.
SAFETY DEVICE
This log set has a pilot with an Oxygen Depletion
Sensing (ODS) safety shutoff system. The ODS/
pilot shuts off the log set if there is not enough
fresh air.
ELECTRONIC IGNITION SYSTEM
This system has an electronic ignitor. This system
requires no matches or other sources to light the log
set. Receiver requires 4 AA batteries (included),
hand-held remote control requires a 12-volt bat -
tery and a 3-volt button cell battery for the LCD
display (both included).
OPTIONAL REMOTE
CONTROL ACCESSORIES
There are two optional remote accessories available
for the PDG log set models that come standard with
the BTB log set models:
• wall switch
• hand-held ON/OFF remote
See Accessories , page 19.
Chassis
Assembly
Log Set
Assembly
Control
Knob
Selector
Switch
Flame
Adjustment
Knob
PDG Models
Electronic
Ignitor
Left
Side
Front
Right
Side