Astra P-10, Руководство пользователя

Страница: 19 / 28

19
Astra P-10 USER MANUAL
Beeper volume setting enables the user to change the volume of the display signals from 1 to 5 or switch the
beeper off.
The beeper is off.
The sound level is 1.
... ...
The sound level is 5.
Units of temperature measuring.
Celsius.
Fahrenheit.
The controller information menu subsection. Used for service purposes.
Press the button to check a version of a mainboard and a display of a controller.
Gear motor control menu. Gear motor ON/OFF function is used after empty pellet hopper filling. When the gear
motor is turned ON, the empty tube of auger is being stuffed with pellets
Press the button and hold it whilst the gear motor operates and fills the auger tube with pellets. Release
the button to stop the gear motor. While the gear motor is turned ON, running lines are indicated on the screen.
The service menu subsection. Access for the authorized service personnel only.
The key symbol is indicated on the screen.
To modify the setup options, press button to enter the Setup menu section. The set idle display brightness value is displayed.
To move between the setup options, press buttons to display the settings. To change a setting, press button and use
buttons to increase/decrease the selected values. When finished, press button to confirm the set value.
9. MAINTENANCE AND CLEANING
Regular cleaning is of crucial importance for the continued operation of the stove. Failure to follow the cleaning schedule, or the use
of dirty fuel can clog the inner spaces of the stove. These impurities can hinder air supply to the combustion chamber and cause the
stove to stop working. To prevent this outcome, it is highly recommended that the user perform the cleaning activities specifically as
described in the following chapters.
• CLEANING SCHEDULE
Tasks/ Frequency
Daily Once per 2-3 days Once per 30 days Once per 60-90 days Once per season
Fire pot cleaning
o
Ashes drawer emptying
o
Door glass cleaning o
Flame trap cleaning
o
Exchanger tubes scraping
o
Combustion chamber vacuuming o
Pellet hopper vacuuming
o
Flue channels cleaning o
Door gasket changing o
Chimney cleaning
o
Before starting cleaning works, make sure that:
• The electrical supply switch on the rear panel of the stove is OFF;