18
Astra P-10 USER MANUAL
• REGULATION OF THE ROOM VENTILATOR
The controller enables you to change the rotational speed of the room ventilator. There are six levels of the speed:
. We recommend you to let the stove itself decide upon the rotational
intensity. For this option, the speed setting
must be chosen. The optimal stove control principle requires that a user of the
stove would rather set a desired room temperature with weekly timer or manually and let the stove to decide itself which burning
power and rotational speed levels are most appropriate in the given situation.
• SETTING THE FUEL OPTIONS
The Fuel menu section enables you to select the fuel quality. The quality of pellets are expressed in the following values:
. These values stand for the moisture content in pellets. The dryer the fuel, the higher fuel value in this menu
section must be chosen.
The fuel quality option in this stove is deactivated. The fuel value 1 is set irreversibly.
• MODIFYING THE SETUP OPTIONS
The Setup menu section enables you to set the options for Key lock, Idle display brightness, Idle display mode, Beeper volume and
view service information.
The Key lock option enables you to lock the keyboard on the display in order to prevent accidental changes of the
settings. With the key lock enabled, you can navigate the menu to display current values, but you cannot edit any
of the settings, except the Key lock itself. Note that this option does not disable the remote control. The Key lock
setting offers the following options:
The Key lock is disabled, all buttons are operational.
The edit mode is disabled. The Enter button is locked.
The edit and the power on/off modes are disabled. The Enter button and the Power button are locked.
We recommend using the Key lock option, when cleaning the display.
The display brightness in the idle mode can be set from 1 to 5 or set to turn off after 30 seconds.
The display switches off after 30 seconds. The lighting is restored after pressing any button.
Brightness of the display is 1.
... ...
Brightness of the display is 5.
The Idle display mode has the following options:
The display stays in the last selected menu section. In case the menu has been in the edit mode, the changes are
discarded and the edit mode is exited.
The display exits the last selected menu section and cycles between a current room temperature and a clock.
<->
The display exits the last selected menu section and moves to the Temperature menu. The actual measured room
temperature is displayed on the screen.
The display exits the last selected menu section and moves to the Time menu. The current time is indicated on
the screen.
