7. Press Esc to return to the
Main
tab. Navigate to
Advanced
>
CPU Configuration
, and
set the following configurations:
a.
Hyper-Threading
to
Disabled
b.
Intel Virtualization Technology
to
Enabled
8. Press Esc to return to the
Main
tab, and navigate to
Chipset
>
North Bridge
. Set
VT-d
to
Enabled
.
4.6 BIOS BLH6710H
To configure BIOS version BLH6710H, follow these steps:
1. Reboot the development workstation, and immediately press the Delete key as the system
boots to enter the BIOS Setup Utility.
2. When the BIOS Setup Utility opens, press the F9 key to
Load Defaults
. Select
Y
to load
BIOS defaults.
3. Navigate to the
Main
tab, and set the date and time using Greenwich Mean Time.
4. Navigate to
Configuration
>
SATA Drives
, and press Enter. Set the following con-
figurations:
a.
Chipset SATA
to
Enable
b.
Chipset SATA Mode
to
AHCI
c.
S.M.A.R.T.
to
Enable
d.
eSATA Ports
to
Disable
5. To return to the
Configuration
menu, press Esc.
6. Navigate to
Fan Control & Real-Time Monitoring
>
CPU Fan
, and press Enter. Set
the following configurations:
a.
Control Mode
to
Manual
b.
Minimum Duty Cycle
to
100
7. Navigate to
Security
, and set the following configurations:
a.
Execute Disable Bit
to
Enable
b.
Intel® Virtualization Technology
to
Enable
8. Navigate to
Power
, and set the following configurations:
a.
Enhanced Intel SpeedStep® Technology
to
Enable
b.
After Power Failure
to
Last State
12
Copyright © 2018 Advanced Simulation Technology inc.
ACE Target and Studio Cold Start Guide (Rev. B, Ver. 0)
