7. Navigate to
Chipset
>
SouthBridge Configuration
, and set
GbE LAN Boot
to
Enabled
.
8. Navigate to
Exit
, and select
Exit and Save
.
9. Reboot the development workstation, and immediately press the Delete key as the system
boots to enter the BIOS Setup Utility.
10. Navigate to
Boot
>
Boot Device Priority
, and set the following configurations:
a.
1st Boot Device
to the
CD/DVD
option
b.
2nd Boot Device
to the
SATA
option
c.
3rd Boot Device
to the
network
option (e.g.,
IBA GE SLOT DOC8 V1327
)
Note
: Hardware names and model numbers may vary depending your hardware
type.
d.
4th Boot Device
to
Disabled
11. Navigate to the
Exit
tab, and select
Save Changes and Exit
.
4.4 BIOS Q67AX 2.14.1219 and higher
To configure BIOS Q67AX 2.14.1219 and higher, follow these steps:
1. Reboot the development workstation, and immediately press the Delete key as the system
boots to enter the BIOS Setup Utility.
2. Navigate to the
Exit
tab, and select
Load Optimal Defaults
.
3. On the
Menu
tab, set the
System Date
and
System Time
using Greenwich Mean Time.
4. Navigate to
Chipset
>
PCH-IO Configuration
, and set the following configurations:
a.
Onboard Lan1 Controller
to
Enabled
b.
Onboard Lan2 Device
to
Enabled
c.
Restore AC Power Loss
to
Power On
5. To return to the
Main
tab, press Esc. Navigate to
Chipset
>
System Agent (SA) Con-
figuration
, and set
VT-d
to
Enabled
.
6. To return to the
Main
tab, press Esc. Navigate to
Boot
>
CSM Parameters
, and set
Launch PXE OpROM policy
to
Legacy only.
7. To save and reset, press the F4 key. A confirmation message requests, "Save con-
figuration and reset?" Select
Yes
.
Copyright © 2018 Advanced Simulation Technology inc.
9
ACE Target and Studio Cold Start Guide (Rev. B, Ver. 0)
