4. Navigate to the
Advanced BIOS Features
, and set the following configurations:
a.
First Boot Device
to the
CD-ROM
option
b.
Second Boot Device
to the
hard disk
option
c.
Third Boot Device
to the
LAN
option
5. Navigate to
Integrated Peripherals
.
6. Select
Onboard Device
, and set the following configurations:
a.
USB Keyboard Support
to
Enabled
b.
Onboard Lan Boot ROM
to
Enabled
7. Select
OnChip IDE Device
, and set the following configurations:
a.
On-Chip Serial ATA
to
Enhanced Mode
b.
SATA PORT Speed Settings
to
Force GEN I
8. Select
Super IO Device
, and set
PWERON After PWR-Fail
to
On
.
9. Navigate to the
Main
tab, and select
Save and Exit Setup
.
4.3 BIOS Q35AX American Megatrends
To configure BIOS version Q35AX American Megatrends, follow these steps:
1. Reboot the development workstation, and immediately press the Delete key as the system
boots to enter the BIOS Setup Utility.
2. Navigate to the
Exit
tab, and select
Load Optimal Defaults
.
3. Navigate to the
Main
tab, and set the date and time using Greenwich Mean Time.
4. Navigate to
Advanced
>
CPU Configuration
, and set the following configurations:
a.
Intel® SpeedStep™ tech
to
Disabled
5. Navigate to
Advanced
>
IDE Configuration
, and set the following configurations:
a.
SATA#1 Configuration
to
Enhanced
b.
Configure SATA#1
to
IDE
6. Navigate to
Advanced
>
SuperIO Configuration
, and set the following configurations:
a.
Serial Port 1 Address
to
Disabled
b.
Serial Port 2 Address
to
Disabled
8
Copyright © 2018 Advanced Simulation Technology inc.
ACE Target and Studio Cold Start Guide (Rev. B, Ver. 0)
