6. Navigate to
Advanced
>
CPU Configuration
. Set the following configurations:
a.
Execute Disable Function
to
Enabled
b.
Intel® Speed Step™
to
Disabled
7. Navigate to
Advanced
>
Onboard Device Configuration
, and set the
Lan Option
ROM
to
Enabled
.
8. Navigate to the
Exit
tab, and select
Exit and Save
.
9. As the server reboots, press the Delete key to enter the BIOS Setup Utility.
10. Navigate to
Boot
>
Boot Device Priority
. Set the following configurations:
a.
1st Boot Device
to the
CD/DVD drive
option
b.
2nd Boot Device
to the
hard drive
option (e.g.,
WDC WR800JD
)
c.
3rd Boot Device
to the
Ethernet
option (e.g.,
IBA GE Slot 0200 v1228
)
Note
: Names will vary across different CD drives, hard drives, and Ethernet ROMs.
d.
4th Boot Device
to
Disabled
11. Navigate to the
Exit
tab, and select
Exit and Save
.
4.2 BIOS Advantech AIMB-562 Award
Phoenix - AwardBIOS v6. 00PG, An Energy Start Ally
Copyright (C) 1984-2006, Phoenix Technologies, LTD
---- AIMB-562 BIOS xxxx
Figure 7: AIMB-562 American Megatrends BIOS version
To configure BIOS version AIMB-562 Award, follow these steps:
1. Reboot the development workstation, and immediately press the Delete key as the system
boots to enter the BIOS Setup Utility.
2. Select
Load Optimized Defaults
.
3. Select
Standard CMOS Features
, and set the following configurations:
a. The system date and time using Greenwich Mean Time
b.
Halt On
to
No Errors
Copyright © 2018 Advanced Simulation Technology inc.
7
ACE Target and Studio Cold Start Guide (Rev. B, Ver. 0)
