manualshive.com logo in svg

Associated Research Hypot II 4500D, Руководство по эксплуатации и обслуживанию

Поделиться
Скачать
Associated Research Hypot II 4500D Скачать руководство пользователя страница 7

SAFETY

3

A Hipot produces voltages and currents that can cause harmful or fatal electric shock.  To
prevent accidental injury or death, these safety procedures must be strictly observed when
handling and using the test instrument.

SERVICE AND MAINTENANCE
User Service

To prevent electric shock do not remove the instrument cover. There are no user
serviceable parts inside.  Routine maintenance or cleaning of internal parts is not
necessary.  Avoid the use of cleaning agents, chemicals, or liquids to clean the cabinet of
the instrument.  Some chemicals are corrosive and may damage the finish of the
instrument or may damage plastic parts or lettering.  Any external cleaning should be done
with a clean dry or slightly damp cloth.  Application or spillage of liquid on the instrument
may penetrate the cabinet through the ventilation holes or damage the controls and/or
switches.  Schematics, when provided, are for reference only.  Any replacement cables and
high voltage components should be acquired directly from Associated Research, Inc.
Refer servicing to an Associated Research, Inc. authorized service center.

ASSOCIATED RESEARCH, INC.

13860 WEST LAUREL DRIVE

LAKE FOREST, IL 60045-4546  U.S.A.

(

PHONE: 1 (847) 367-4077

1 (800) 858-TEST (8378)

FAX: 1 (847) 367-4080

E-MAIL : [email protected]

www.asresearch

.com

Service Interval

The instrument and its power cord, test leads, and accessories must be returned at least
once a year to an Associated Research authorized service center for calibration and
inspection of safety related components.  Associated Research will not be held liable for
injuries suffered if the instrument is not returned for its annual safety check and maintained
properly.

User Modifications

Unauthorized user modifications will void your warranty. Associated Research will not be
responsible for any injuries sustained due to unauthorized equipment modifications or use
of parts not specified by Associated Research.  Instruments returned to Associated
Research with unsafe modifications will be returned to their original operating condition at
your expense.

TEST STATION
Location

Select an area away from the main stream of activity which employees do not walk
through in performing their normal duties. If this is not practical because of production
line flow, then the area should be roped off and marked for

HIGH VOLTAGE

TESTING

.  No employees other than the test operators should be allowed inside.

Содержание Hypot II 4500D
















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды