Associated Research Hypot II 4500D Скачать руководство пользователя | Manualshive

Страница: 25 / 47

background image

INSTALLATION

21

Power Cable

BEFORE CONNECTING POWER TO THIS INSTRUMENT,
THE PROTECTIVE GROUND (EARTH) TERMINALS OF THIS

INSTRUMENT MUST BE CONNECTED TO THE PROTECTIVE CONDUCTOR
OF THE LINE (MAINS) POWER CORD. THE MAIN PLUG SHALL ONLY BE
INSERTED IN A SOCKET OUTLET (RECEPTACLE) PROVIDED WITH A
PROTECTIVE GROUND (EARTH) CONTACT. THIS PROTECTIVE GROUND
(EARTH) MUST NOT BE DEFEATED BY THE USE OF AN EXTENSION CORD
(POWER CABLE) WITHOUT A PROTECTIVE CONDUCTOR (GROUNDING).

This instrument is shipped with a three-wire power cable. When this cable is connected to
an appropriate AC power source, this cable connects the chassis to earth ground. The
type of power cable shipped with each instruments depends on the country of destination.

Operating Environment

This instrument may be operated in temperatures from 32° - 104° F (0° - 40° C)
Relative humidity of 0 to 80%.
Altitude up to 15,000 feet (4,600 meters).

STORAGE AND SHIPMENT

Environment

This instrument may be stored or shipped in environments with the following limits:

Temperature......................... -40° to +75°C

Altitude............................ 7,620 meters (25,000 feet)

The instrument should also be protected against temperature extremes that may cause
condensation within the instrument.

Packaging

Original Packaging: Please retain all original packaging materials if you do not have an
alternate method of repackaging. If you are returning your instrument to us for servicing
please repackage the instrument in its original container or use an alternate packaging
solution. Please do not reuse the original packing material if there appears to be damage or
missing packing material. Contact our customer support department (1-800-858-8378) for
an RGA (return goods authorization) number. Please enclose the instrument with all
options, accessories and test leads. Indicate the nature of the problem or type of service
needed. Also, please mark the container “FRAGILE” to insure proper handling. Upon
receipt your instrument will be issued an AR service number. Please refer to this number
in all correspondence.

WARNING

«
...
23
24
25
26
27
...
»

Содержание Hypot II 4500D
















































Отзывы:

Нет отзывов

Похожие инструкции для Hypot II 4500D

Бренд: Keithley Страницы: 36

Бренд: Rain-Flo Irrigation Страницы: 16

Бренд: Salvis Страницы: 40

Бренд: IDEAL Страницы: 2

Бренд: Radarcan Страницы: 40

Бренд: R&S Страницы: 2677

ST60+ SPEED INSTRUMENT

Бренд: Raymarine Страницы: 60

Бренд: Raymarine Страницы: 15

Бренд: RaycoWylie Страницы: 9

Бренд: Raven Страницы: 58

Бренд: Raven Страницы: 26

Бренд: Ravo Страницы: 114

Бренд: Alcoscan Страницы: 6

Бренд: ZOLL Страницы: 48

Optima XR200amx

Бренд: GE Страницы: 46

Бренд: Daavlin Страницы: 55

Бренд: Daavlin Страницы: 19

Бренд: Wang Страницы: 146

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды