Associated Research Hypot II 4500D, Руководство по эксплуатации и обслуживанию

Страница: 36 / 47

OPERATION
32
3.7. Low Limit
If the leakage current does not exceed the low limit setting, the red indicator light
will illuminate on the RESET switch and an alarm will sound. The display will
show:
LO-LMT MX XXX.Xs
X.XXKVAC XX.XxmA
3.8. Resetting the Alarm
To stop the alarm, please press the RESET switch once. The alarm will stop and
the display will retain the failure information. If the RESET switch is pressed
again, the data on the display screen will be cleared and the display will indicate the
setting data from the last test. The instrument is now ready for the next test.
3.9. Pass
If the DUT passed the test, the instrument will output a short audible beep tone to
indicate the DUT has passed the test. The display will show:
Pass MX XXX.Xs
X.XXKVAC XX.XxmA
The instrument is now ready to perform another test.
3.10. Aborting a Test
If the operator elects to abort a test in process, this can be accomplished by
pressing the RESET switch at anytime. The instrument will stop the test process
immediately and the display will show:
Abort MX XXX.Xs
X.XXKVAC XX.XxmA
Press the TEST button to initiate another test.