Copyright © 2019, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole or
in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.
80-9360-1030-020 Rev 6 11/20
10
D6021/D6031 Double Unit Series
(Push Side) Power Operator
Install Operator
Figure 16
Figure 17
Access Door
Union Assembly - View From Floor
Spacer
Spacer
Union Assembly
Mounting Screw
(typical)
Power Module
Sub-assembly
4 Pin Black
Connector
Power Module
Sub-assembly
4 Pin Black
Connector
Union Assembly
4 Pin Black Connector
Figure 18
Operator LAP
3 Pin White
Connector
Power Module
Sub-assembly
3 Pin White
Connector
Power Module
Sub-assembly
10 Pin Black
Connector
Operator LAP
10 Pin Black
Connector
Operator LAP
3 Pin White
Connector
Power Module
Sub-assembly
3 Pin White
Connector
Power Module
Sub-assembly
10 Pin Black
Connector
Operator LAP
10 Pin Black
Connector
E. Connect Power Module Sub-assemblies to LAPS.
1. Attach 10-pin black connectors between each power
module sub-assembly and its operator LAP.
(Figure 16)
NOTE: Connectors are keyed and only attach one way.
2. Attach 3-pin white connectors between each power
module sub-assembly and its operator LAP.
(Figure 16)
F. Install Union Assembly.
1. Orient union assembly so access door
covering selector mode switches faces floor.
(Figure 17)
2. Secure union assembly to backplate using
four (4) #8-32 x 5/16" Phillips pan head
screws. (Figure 17)
3. Connect 4-pin black square connector from
power module sub-assembly to 4-pin black
connector from union assembly for each
operator. (Figure 18)
NOTE: Connectors are keyed and only
assembly one way.