AsGa LightBolt 28304-E1, Руководство пользователя

Страница: 85 / 100

AsGa Light AsGa Light AsGa Light AsGa LightBOLT BOLT BOLT BOLT 10GigE Switch 10GigE Switch 10GigE Switch 10GigE Switch
U U U User Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration
85
Related Commands
5.1.37 snmp-server community
This command set up the community access string to permit access to the Simple Network
Management Protocol (SNMP), use the
snmp-server community
command in global configuration
mode. To remove the specified community string, use the
no
form of this command
Command Syntax
snmp-server community string ( ro | rw ) ( remote ip-addres | ) ( view view-name | )
<string>
Community string that consists of 1 to 32 alphanumeric characters much like a password,
permitting access to SNMP. Blank spaces are not permitted in the community string.
ro :
( Optional) Specifies read-only access. Authorized management stations can retrieve only MIB
objects.
rw:
(Optional) Specifies read-write access. Authorized management stations can both retrieve and
modify MIB objects.
remote: Specify the remote SNMP management system. When specify the system check for snmp
messages coming from the server.
view: specify the particular view associated to the community string.
Command Mode
Exec mode
Usage
LightBOLT(config)# snmp-server community <string> <ro | rw>
Examples
LightBOLT(config)# snmp-server community ready2u ro
Related Commands
5.1.38 snmp-server name
Use this command in order to specify the administrative SNMP server name. Use the no
form of this command to negate a name.
Command Syntax
snmp-server name
name
snmp-server "Configure parameters to SNMP Agent"
name
"Change administrative name"
name
"Administrative name"
Command Mode
Config