AsGa Light
AsGa Light
AsGa Light
AsGa LightBOLT
BOLT
BOLT
BOLT 10GigE Switch
10GigE Switch
10GigE Switch
10GigE Switch
U
U
U
User Guide
ser Guide
ser Guide
ser Guide
Configuration
Configuration
Configuration
Configuration
62
5 APPENDIX B
5.1
access-list
•
Access List Masks
Masks are used with IP addresses in IP ACLs to specify what should be permitted and denied. Masks
in order to configure IP addresses on interfaces start with 255 and have the large values on the left
side, for example, IP address 209.165.202.129 with a 255.255.255.224 mask. Masks for IP ACLs are
the reverse, for example, mask 0.0.0.255. This is sometimes called an inverse mask or a wildcard
mask. When the value of the mask is broken down into binary (0s and 1s), the results determine
which address bits are to be considered in processing the traffic. A 0 indicates that the address bits
must be considered (exact match); a 1 in the mask is a "don't care".
•
Command Syntax
•
Command Mode
•
Default
•
Examples
•
Related Commands
5.1.1 Boot
Use this command to change your booting parameters:
Command Syntax
Boot {info | system | config }
Info
: show the current booting files.
System
: change your booting system image.
Config
: change your current booting configuration file.
Command Mode
Exec mode
Default
By default the system boot using a default.txt configuration file and its default system image file.
Examples
AsgOS(config)#boot system asgos-ver1.0.bin
AsgOS(config)#boot config AsGOS.conf
AsgOS(config)#boot info
Config file: AsGOS.conf
Image file: asgos-ver1.0.bin
Related Commands
No related commands
5.1.2 Clear counters
Use this privileged command to clear all system counters.
