AsGa Light
AsGa Light
AsGa Light
AsGa LightBOLT
BOLT
BOLT
BOLT 10GigE Switch
10GigE Switch
10GigE Switch
10GigE Switch
User
User
User
User Guide
Guide
Guide
Guide
Safety Warnings
Safety Warnings
Safety Warnings
Safety Warnings
3
SAFETY WARNINGS
Safety
When installing, operating and maintaining this equipment, basic safety precautions should always be
followed. No adjustment, repair or maintenance should be performed by the operator or user. Only
qualified person or authorized services are allowed to make repairs or adjustments to this equipment.
Optical Device
Since this product has an optical device, the following security warnings should be followed:
Internal Voltage
As the serial inputs and outputs of this equipment operate with voltages lower
than the 5 volt threshold, it cannot harm the user when handling the equipment.
However, overvoltages coming from the Telecommunication Network could be
present, mainly if the equipment is not properly installed.
Electrostatic Discharge
This product (chassis and printed circuit boards) can be handled by the user, not
presenting any problems concerning electrical discharge. However, it is
recommended user to follow ANSI IPC-A-610 standard for electrical discharge
(ESD) and use a wrist strap when removing or inserting any card into the
equipment.
The information contained in this guide is AsGa’s property, and it is not authorized to publish,
reproduce or to make any other use without written permission of AsGa.
AsGa reserves the right to make changes to this guide without notice.
•
Never look directly into the optical transmission interface, aligning your
eye with theoptical device. Doing so, user could expose your eye to a
concentrated beam of optical radiation.
•
Do not attempt to adjust the optical device, intending to amplify or
attenuate theoptical signal.
