Pipeline Start Here Guide
Preliminary January 30, 1998
B-1
B
IP Routing Configuration Example
This appendix covers the following topics:
Sample Pipeline configuration data
Using the information in this appendix, you can see how to set up IP routing to
connect to an Internet Service Provider (ISP) or a corporate remote IP network
using the QuickStart utility of the JBPC or the on-board software on the Pipeline.
Use the placement of the sample data in the examples to guide you when you
enter your own data. The sample data represents the minimum amount of
information you need.
If you need configuration information, contact these sources:
•
For information about your ISDN line, contact your telephone company.
•
For information about the remote network, contact the administrator of that
network, such as the network administrator for your Internet Service
Provider, or your corporate network administrator.
Before you start configuring your Pipeline, be sure TCP/IP is configured, as
described in Appendix A, “TCP/IP Example Settings.”
Sample Pipeline configuration data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1
Setting up IP routing using QuickStart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-3
Setting up IP routing in the Configure menu . . . . . . . . . . . . . . . . . . . . . . . . B-5
