Installing an EN/SC Adapter
2-11
Installing a Micro EN/SC Adapter
The Micro EN/SC Adapter has an RJ45 and a BNC port while the
Micro EN/SC 10T Adapter has only the RJ45 port.
If you are installing the Micro EN/SC 10T Adapter, disregard the
instructions for Thin Ethernet cabling.
To install the Asanté Micro EN/SC Adapter, perform the following
steps:
1
Your PowerBook must be turned
OFF
.
2
Plug the Micro EN/SC Adapter into the HDI-30 SCSI port
on the PowerBook. (You do not need to set the SCSI
address; it is set in the hardware to 6.)
3
Plug the adapter’s ADB power cable into the PowerBook’s
ADB port.
The ADB power cable supports pass-through for other ADB
devices, such as keyboards.
Figure 2-6
Connecting the Micro EN/SC to the PowerBook
ADB power cable
ADB port
RJ45 port
for 10BaseT
BNC port
for Thin
HDI-30 SCSI port
Macintosh
PowerBook
ENSC Ch 2 Page 11 Monday, August 26, 1996 2:50 PM
