Installing an EN/SC Adapter
2-7
With Thin cabling
Caution!
•
Check with your network administrator before con-
necting the Micro EN/SC adapter to the network.
•
If the Ethernet cable does not have a T-connector or a
BNC barrel connecting two cable segments, splice the
cable with the appropriate BNC hardware.
•
Connect the BNC
T-connector on the Ethernet cable to
the adapter’s BNC port.
•
If the Macintosh is at the end of a network segment,
keep the T-connector and terminator on the segment
cable and connect the T-connector to the adapter’s
BNC port. The connector slips on, twists, and locks in
place.
6
Connect the adapter to the 12 VAC power adapter pro-
vided by Asanté.
Do not use any other power adapter
.
Figure 2-4
Connecting the Mini EN/SC as a single SCSI device
!
AC power cable
BNC port
RJ 45 port
Asant´é B-25/DB-25
to DB-25 SCSI cable
Macintosh Classic
ENSC Ch 2 Page 7 Monday, August 26, 1996 2:50 PM
