manualshive.com logo in svg

Asante Desktop EN/SC, Руководство по установке, Страница: 14 / 60

Поделиться
Скачать
Asante Desktop EN/SC Скачать руководство пользователя страница 14

 

2-2

Installing an EN/SC Adapter

 

Preparing for the installation

 

Before you install an Asanté EN/SC Adapter, you must:

•

Know the safety rules

•

Check the software and hardware 

•

Know about setting SCSI termination and link integrity on a 
10BaseT network (for the Mini EN/SC Adapter)

•

Know about setting the SCSI address on the Mini EN/SC 
Adapter

 

Observing the safety rules

 

Observe the following safety precautions during the installation:

 

∆

 

Important!

 

   Before you connect and configure an Asanté  

EN/SC adapter, turn off the Macintosh or PowerBook and all 
connected peripherals. 

Follow  Apple guidelines and always plug or unplug devices 
connected to the SCSI port with the power off!

•

Consult your network administrator about the installation 
and its effect on the network;  other users must be warned 
of the possible interruption of network operations. 

 

Checking the software and hardware

 

To install an  Asanté EN/SC Adapter, you need the following software: 

•

Apple System Software 6.0.7 or higher

•

Asanté EtherTalk Installer or higher

Make sure you have:

•

An Ethernet network with AppleTalk-compatible devices  

•

The appropriate EN/SC Adapter for your computer

•

The appropriate SCSI cable with the Mini EN/SC Adapter 

 

ENSC Ch 2  Page 2  Monday, August 26, 1996  2:50 PM

Содержание Desktop EN/SC





























































Отзывы:

Нет отзывов