AS DH -N2 Series Скачать руководство пользователя

Страница: 41 / 44

AS Strömungstechnik GmbH

www.asstroemungstechnik.de

Version date: 09/2020

9.3 Returning fill heads

1. Disassemble the fill head (see Section

“8.1”).

2. Clean the disassembled fill head (see

Section 9.1).

3. Request a decontamination certificate

from AS Strömungstechnik.

4. Return the completed decon-

tamination certificate to AS

Strömungstechnik.

If the decontamination certificate is

not properly and completely filled out,

there will be no credit provided or re-

pair. A disposal cost will be applied. It

is important to fill out the form for the

safety of our personnel as well as the

safety of logistic providers.

9.4 Fill head disposal

WARNING

Hazard from chemicals!

Chemicals can cause irritation and

chemical burns.
• Observe residual debris and degas-

sing of diffused chemicals

• Observe the safety data sheets (SDS)

of the chemicals used.

1. Disassemble the fill head (see Section

“8.1”).

2. Clean the disassembled fill head (see

Section 9.1).

3. Dispose of all parts in an environmen-

tally correct manner.

Incorrect or negligent disposal can
cause considerable environmental
pollution.

• Disposal must take place in accor-

dance with the applicable national
rules and regulations.

In case of doubt, consult the man-
ufacturer or obtain information on
the environmentally responsible
disposal from the local authorities
or disposal specialists.

Maintenance/disposal

Содержание DH -N2 Series













































Результаты поиска

Содержание DH -N2 Series

Отзывы:

Похожие инструкции для DH -N2 Series

Бренды по названию

Популярные бренды

AS DH -N2 Series, Руководство по эксплуатации

Результаты поиска

Содержание DH -N2 Series

Отзывы:

Похожие инструкции для DH -N2 Series

Бренды по названию

Популярные бренды