AS DH -N2 Series Скачать руководство пользователя

Страница: 40 / 44

AS Strömungstechnik GmbH

www.asstroemungstechnik.de

Version date: 09/2020

9 Maintenance/disposal

9.1 Cleaning the fill head

•

After disassembly, the liquid channel

of the fill head must be flushed with

ultra pure water or a suitable flushing

medium.

•

In the case of hardening, adhesive

and clumping chemicals, we recom-

mend flushing the entire delivery line

with ultra pure water or a suitable

flushing medium after each use.

•

If necessary, wash the fill head from

the outside with ultra pure water or a

suitable rinsing medium.

9.2 Fill head maintenance

The following checks must be carried out

regularly, at least monthly, in addition to the

checks during assembly:

Component

Testing

Fill head

Check regularly for discol-
oration and damage.

Check valve

Regular functionality
check

O-rings on the
fill head

Regularly check for wear
and tear and replace if
necessary.

Electrical con-
ductivity

For CD version, check
conductivity regularly
(may change due to expo-
sure to chemicals).

O-ring on
check valve

Regularly check whether
the check valve seals
completely.

Tap/ball valve /
shut-off valve

Regular function check.

Fill head

Regularly check the con-
nections for proper screw
connections.

Overfilling
sensor

Regular function check.

Maintenance/disposal

Содержание DH -N2 Series













































Результаты поиска

Содержание DH -N2 Series

Отзывы:

Похожие инструкции для DH -N2 Series

Бренды по названию

Популярные бренды

AS DH -N2 Series, Руководство по эксплуатации

Результаты поиска

Содержание DH -N2 Series

Отзывы:

Похожие инструкции для DH -N2 Series

Бренды по названию

Популярные бренды