AS DH -N2 Series Скачать руководство пользователя

Страница: 38 / 44

AS Strömungstechnik GmbH

www.asstroemungstechnik.de

Version date: 09/2020

8 Disassembly

8.1 Dismantling the fill head

WARNING

Hazard from chemicals!

Chemicals can cause irritation and

chemical burns.
• Observe the proper Standard Operat-

ing Procedures (SOP) when handling

hazardous substances.

• Observe the safety data sheets (SDS)

of the chemicals used.

• Wear the necessary personal pro-

tective equipment (PPE) (suitable

protective clothing, protective gloves,

respirators and safety goggles / face

shield).

1. Make sure that there is no positive

pressure in the fill line.

Positive pressure in the fill line would

result in the check valve being pushed

open and causing liquid to flow out of

the fill head and create a spill in the

filling area.

2. For fill heads with plug valve (turn-

cock), ball valve or outlet tap, close

the manual shut-off valve.

3. Push the anti-rotation clip (1) upwards.

4. Slowly unscrew the fill head via the

tightening nut.

If the container is under any pressure

or vacuum when opened, it is drained

via the ventilation hole in the dip tube.

You may hear a hissing sound. In this

case, do not continue unscrewing the

fill head, wait until no more hissing can

be heard and then finish unscrewing.

Disassembly

Содержание DH -N2 Series













































Результаты поиска

Содержание DH -N2 Series

Отзывы:

Похожие инструкции для DH -N2 Series

Бренды по названию

Популярные бренды

AS DH -N2 Series, Руководство по эксплуатации

Результаты поиска

Содержание DH -N2 Series

Отзывы:

Похожие инструкции для DH -N2 Series

Бренды по названию

Популярные бренды