Installing the switch
|
24
Aruba CX 10000 1U 4 post Rack Mount Kit (R8R56A)
4-Post rack mountable with 4-Post rack mount kit in Port-to-Power or Power-to-Port configurations.
CTO/Rack-Shippable
4-Post rack
See
Installation precautions and guidelines
before mounting your switch.
Two-post Rack Mount Option
The switch is designed to be mounted in any EIA-standard 19-inch telco rack or communication equipment
cabinet using the Aruba X412 1U Universal 2-Post Rack Mount Kit (R8R55A; sold separately).
For safe operation, please review the mounting precautions in
Installation precautions and guidelines
, before
mounting a switch.
The 12-24 screws supplied with the two-post rack mount kit are the correct threading for standard EIA/TIA open
19- inch racks. If installing the switch in an equipment cabinet such as a server cabinet, use the clips and screws
that came with the cabinet in place of the 12-24 screws that are supplied with the two-post rack mount kit.
Complete step 1, and plan which four holes you will be using in the cabinet and install all four clips. Then proceed
to step 2.
1. Use a T20 drive screwdriver and attach the mounting brackets to the switch with the included 8-mm
M4 screws.
