Figure 5
Aruba 10000 power supplies (R8R51A/R8R52A)
Label
Description
1
Release Latch
2
Pull Handle
The Aruba 10000 switch is shipped with two hot-swappable, field-replaceable, AC power supplies. Each
power supply has a country-specific power cord for connection to an AC power outlet. The switch can
operate with one active power supply.
Power supply information
For indoor use only. The switch, AC power cord and all connected cables are not designed for outdoor use.
During installation, ensure that AC power is NOT connected to the power supply being installed.
Shock hazard. To completely remove power from the switch, disconnect all power cords.
For important safety, environmental, and regulatory information, see
Safety and Compliance Information for
Server, Storage, Power, Networking, and Rack Products
, available at
http://www.hpe.com/support/Safety-
Brazil Statement
Este equipamento deve ser conectado obrigatoriamente em tomada de rede de
energia elétrica que possua aterramento (três pinos), conforme a Norma NBR ABNT
5410, visando a segurança dos usuários contra choques elétricos.)
Power supply status LED
Aruba CX 10000 Distributed Services Switch | Installation and Getting Started Guide
12
